|
| |
Go Back a Page
Return to Home Page
- Here are a few examples of my work. The information has been
edited to protect proprietary information.
-
Porous Silicon Etching Cell
-
-
Etching Cell
-
-
Cheapo Ad-Hoc Pressure Regulator
-
-
Fluidic or Microfluidic
Pressure Regulator
-
Microfluidic Crystaline Flapper Valves
-
Fluidic or
Microfluidic Flapper Valve Test Jig
Bubble Flow Observation Jig
Bubble Observation
Chamber
Manometer Fluid Isolator
Fluid Isolator
Modifications to an Ohmic Instruments Force Balance Radiometer
Ohmic Enhancements
Comments Regarding
my Mechanical Design and Analysis Work:
- I have always had a knack for mechanical design but it is only in the
last ten years that this ability was been fully developed. As of this
time, I have done well over a hundred mechanical designs for various
applications. All of the resultant designs performed as intended. Many of
these mechanical designs relate to ultrasonic, fluidic, electro-optical and
electromechanical devices. Some were simple and some were not so
simple. A few were way not so simple.
-
- In the course of this work, I have become proficient with SolidWorks, a
CAD program that I now routinely use for all but the simplest design tasks.
-
- I have also installed and
routinely use a modest machine shop. Experience actually making parts
I have designed, has been a valuable
mechanical part design learning tool. "Hands on" shop experience has helped me understand mechanical design
and part fabrication from the machine shop point-of-view. The net
result has been parts that work better and less expensive. Good relations
with machine shops and generally faster turnaround are other commonly resultant
benefits.
Go Back a Page
Return to Home Page
|